MICROPHONE, FLOOR STANDING W/ TRIPOD BASE

This secure iPad Floor stand features a tamper-proof iPad mount with restricted access to power and volume buttons, and removable home button blocker. The mount is also adjustable between portrait and landscape. The stand is rated to fit iPads with a 9.7" screen; it is compatible with iPad 2, iPad 3, iPad Air, iPad Pro 9.7, iPad 5 and iPad 6 generations. This unit also features a built in document shelf for display of catalogs, brochures and other marketing or informational materials, and cable management for any surface type. Height: 48" Base Width: 15.75" Base Depth: 11.75" Document Shelf Height: 9.5" Document Shelf Width: 9"

carpet structure provides cleaning action and great absorbency

27"W x 17"D x 46"H (Highest point at the back) Comes in one piece, cannot be folded flat. Roughly 30lbs.

It provides a 60 dB gain adjustment for one mic or line input. The PressMite also features a built-in headphone amp. Two alkaline 9 V batteries provide power for typically more than 8 hours of continuous operation, monitored by a Battery OK LED. The batteries are easily replaced via side-mount trays. A 120 VAC / 24 VDC power adapter (model PS24) is included. In MIC input mode, 18V phantom power is selectable and a three segment LED headroom display speeds level adjustment. If more outputs are needed, PB Series Press Boxes can be connected to the line outputs to provide up to 48 additional mic outputs. The PressMite's box is built to withstand the abuse of public events. Frequency Response: 100 Hz-6 kHz +or-0.3 dB, 15Hz-20kHz +or-3.0 dB Input Impedance: Mic: 1.5 kOhms; Line: 40 kOhms Max Input Level: Mic: -14 dBu; Line: +30 dBu Output Impedance: Mic: 150 Ohms; Line: 600 Ohms Max Output Level: Mic: -17 dBu Mic Outputs; Line: +12 dBu Total Harmonic Distortion: 0.063% at 1 kHz (unity gain) Rise Time: 26 Microseconds Phase Shift: -0.8degrees at 1 kHz (unity gain) Intermodulation Distortion: 0.08% (unity gain, Mic mode) CMR at 60 Hz: Mic: 75 dB; Line: 60 dB Isolation: Mic Outputs: 65 dB between vertically adjacent channel pairs, 107 dB between non-vertically adjacent pairs Line Outputs: Greater than 77 dB Power Requirements: (2) 9 V alkaline batteries or 24 Volt external DC (120 VAC / 24 VDC power adapter included)